Product Introduction
The forged side entry soft-seated floating ball valves are designed according to ISO17292. It is a cost-effective alternative for small-sized trunnion mounted ball valves. The product range consists of two-piece and three-piece split body designs.

Technical Specification
Size Range: 1/2"~6"(DN15~DN150)
Pressure Rating: ASME CLASS 150~2500(PN16~PN420)
Body Material: Carbon steel, SS, Alloy steel, Duplex SS, exotic alloy etc.
End Connection: FLNG (RF, RTJ), BW, SW, NPT
Operation: Manual, Pneumatic, Electric, Hydraulic, etc.
Temperature Range: -46℃~200℃
Fire Safe Design Certificate: Yes, API607, API6FA
Brand: Neway
Applications: Refinery, Petrochemical, Power, Chemical, Pharmaceutical, Paper, etc.

Picture Show

Delivery, Payment and Service
Payment Terms: Normally 30% down payment before production, 70% balance before delivery.
Warranty: 12 months after installation or 18 months after shipment whichever comes first.
Delivery time: Subject to stock availability at placement or order and factory workloads.
Delivery method: By Express, or by air, or by sea, as your request.
Delivery port: Shanghai or as your request.

FAQ
Q: What is the temperature range of this product?
A: Temperature range is -46℃~200℃

Q: We need the valves with shell tat certificate, can you support?
A: Yes, of course, welcome to any inquiry about shell tat valves, we will offer with shell tat certified documents.

Q: If the valve is hard to operate, what is going wrong?
A: Possible causes will be
1, Failure in driving device
2, Lack of lubrication in seat
3, Locked stem

Possible remedies
1, Maintain driving device as per Section 5.2 in IOM
2, Flush or repair seat and ball
3, Loosen packing gland screw and nuts, open and close valve, tighten screw or nut to achieve the proper torque.